Berger Everglow Low-Sheen Emulsion

AREA OF USE: Interior/Exterior, New Plaster, Brickwork, Cement Rendering, Particle Board, and primed metal surfaces

APPLICATION: Brush, Roller or Spray

COVERAGE: 11 sq. metres per litre, 4.2 m 2 per 3.8 litre depending on the porosity and texture of the surface.

DRYING TIME: Touch dry 15 minutes. Recoat- 1 hour

COLOUR RANGE: 30 Standard colours plus white and tinted shades from Berger Colour World Tinting System

THINNING/CLEAN UP: Water

SURFACE PREPARATION:                                                       CONCRETE & CEMENT - should be free from loose sand, mortar splashes and efflorescence.                                                                                 WOOD - should be rubbed down and all knots and Resin Pockets treated with two thin coats of Berger Knotting Varnish.                        PREVIOUSLY OIL PAINTED SURFACE - Clean thoroughly to remove all dirt, grease, etc. Remove all loose and flaking material rub down with a fine grade sandpaper and touch up with the appropriate Berger Primer.